Evco PR100AX9S001 Bedienungsanleitung PDF herunterladen (Seite 6)

LABEL MIN. MAX. U.M. DEF. ERASING OF THE DATA THE INSTRUMENT HAS STORED

Delete Memory? Yes No --- No

(6)

erasing of the data the instrument has stored

Memory Type 0 1 --- 0 data control when the memory has run out (0 = the instrument will not store

any data, 1 = the instrument will erase the oldest data in order to store the

new ones)

(7)

Delete Auto Yes No --- No erasing of the data the instrument has stored after you have printed them

during the Historical Report printing mode

LABEL MIN. MAX. U.M. DEF. MEASURE INPUTS NUMBER

N. Probe 1 6 --- 2 measure inputs number

LABEL MIN. MAX. U.M. DEF. MEASURE INPUT 1

AN1 Type --- --- --- PTC kind of probe 1 (PTC, TC J, TC K, NTC, 4-20mA, PT 100)

AN1 Alarm Setup --- --- --- No kind of alarm (No = it will never be activated, AL = lower alarm,

AH = upper alarm, AH & AL = both the upper alarm and the lower one)

AN1 Max Alarm -99 999

(8)

70 upper alarm threshold (it is important if AN1 Alarm Setup = AH or AH & AL)

AN1 Min Alarm -99 999

(8)

10 lower alarm threshold (it is important if AN1 Alarm Setup = AL or AH & AL)

AN1 Alarm Hyst 120

(8)

2 hysteresis (differential, it is relative to AN1 Max Alarm and AN1 Min Alarm,

it is important if AN1 Alarm Setup ≠ No)

AN1 Offset -20 20

(8)

0 probe 1 calibration

AN1 4-20mA Type --- --- --- %RH 4-20 mA unit of measure (it is important if AN1 Type = 4-20 mA;

RH% = percentage of relative humidity, bar = bar, °C = Celsius degree,

°F = Fahrenheit degree, Hz = hertz, mA = milliampere, - = dimensionless)

AN1 4-20mA Min -99 999 points 0 minimum value of the range of the transducer 1 (it is important if

AN1 Type = 4-20 mA)

AN1 4-20mA Max -99 999 points 100 maximum value of the range of the transducer 1 (it is important if

AN1 Type = 4-20 mA)

AN1 dec. point 0 2 --- 0 decimal point position (it is important if AN1 Type = 4-20 mA;

0 = it will never be showed, 1 = ten, 2 = hundred)

LABEL MIN. MAX. U.M. DEF. MEASURE INPUT 2

AN2 Type --- --- --- PTC kind of probe 2 (PTC, TC J, TC K, NTC, 4-20mA, PT 100)

(9)

AN2 Alarm Setup --- --- --- No kind of alarm (No = it will never be activated, AL = lower alarm,

AH = upper alarm, AH & AL = both the upper alarm and the lower one)

(9)

AN2 Max Alarm -99 999

(10)

70 upper alarm threshold (it is important if AN2 Alarm Setup = AH or AH & AL)

(9)

AN2 Min Alarm -99 999

(10)

10 lower alarm threshold (it is important if AN2 Alarm Setup = AL or AH & AL)

(9)

AN2 Alarm Hyst 120

(10)

2 hysteresis (differential, it is relative to AN2 Max Alarm and AN2 Min Alarm,

it is important if AN2 Alarm Setup ≠ No)

(9)

AN2 Offset -20 20

(10)

0 probe 2 calibration

(9)

AN2 4-20mA Type --- --- --- %RH 4-20 mA unit of measure (it is important if AN2 Type = 4-20 mA;

RH% = percentage of relative humidity, bar = bar, °C = Celsius degree,

°F = Fahrenheit degree, Hz = hertz, mA = milliampere, - = dimensionless)

(9)

AN2 4-20mA Min -99 999 points 0 minimum value of the range of the transducer 2 (it is important if

AN2 Type = 4-20 mA)

(9)

AN2 4-20mA Max -99 999 points 100 maximum value of the range of the transducer 2 (it is important if

AN2 Type = 4-20 mA)

(9)

AN2 dec. point 0 2 --- 0 decimal point position (it is important if AN2 Type = 4-20 mA;

0 = it will never be showed, 1 = ten, 2 = hundred)

(9)

LABEL MIN. MAX. U.M. DEF. MEASURE INPUT 3

AN3 Type --- --- --- PTC kind of probe 3 (PTC, TC J, TC K, NTC, 4-20mA, PT 100)

(11)

AN3 Alarm Setup --- --- --- No kind of alarm (No = it will never be activated, AL = lower alarm,

AH = upper alarm, AH & AL = both the upper alarm and the lower one)

(11)

AN3 Max Alarm -99 999

(12)

70 upper alarm threshold (it is important if AN3 Alarm Setup = AH or AH & AL)

(11)

AN3 Min Alarm -99 999

(12)

10 lower alarm threshold (it is important if AN3 Alarm Setup = AL or AH & AL)

(11)

AN3 Alarm Hyst 120

(12)

2 hysteresis (differential, it is relative to AN3 Max Alarm and AN3 Min Alarm,

it is important if AN3 Alarm Setup ≠ No)

(11)

AN3 Offset -20 20

(12)

0 probe 3 calibration

(11)

AN3 4-20mA Type --- --- --- %RH 4-20 mA unit of measure (it is important if AN3 Type = 4-20 mA;

RH% = percentage of relative humidity, bar = bar, °C = Celsius degree,

°F = Fahrenheit degree, Hz = hertz, mA = milliampere, - = dimensionless)

(11)

AN3 4-20mA Min -99 999 points 0 minimum value of the range of the transducer 3 (it is important if

AN3 Type = 4-20 mA)

(11)

AN3 4-20mA Max -99 999 points 100 maximum value of the range of the transducer 3 (it is important if

AN3 Type = 4-20 mA)

(11)

AN3 dec. point 0 2 --- 0 decimal point position (it is important if AN3 Type = 4-20 mA;

0 = it will never be showed, 1 = ten, 2 = hundred)

(11)

LABEL MIN. MAX. U.M. DEF. MEASURE INPUT 4

AN4 Type --- --- --- PTC kind of probe 4 (PTC, TC J, TC K, NTC, 4-20mA, PT 100)

(13)

AN4 Alarm Setup --- --- --- No kind of alarm (No = it will never be activated, AL = lower alarm,

AH = upper alarm, AH & AL = both the upper alarm and the lower one)

(13)

AN4 Max Alarm -99 999

(14)

70 upper alarm threshold (it is important if AN4 Alarm Setup = AH or AH & AL)

(13)

AN4 Min Alarm -99 999

(14)

10 lower alarm threshold (it is important if AN4 Alarm Setup = AL or AH & AL)

(13)

AN4 Alarm Hyst 120

(14)

2 hysteresis (differential, it is relative to AN4 Max Alarm and AN4 Min Alarm,

it is important if AN4 Alarm Setup ≠ No)

(13)

AN4 Offset -20 20

(14)

0 probe 4 calibration

(13)

1 2 3 4 5 6

Kommentare zu diesen Handbüchern

Keine Kommentare

Evco PR100AX9S001 Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Evco PR100AX9S001