
Evco S.p.A. Vgraph | Hardware manual ver. 1.01 | Code 114VGRAHWE01
page 12 of 22
Parameters Date format - - - - - - - - - dmy
Date format
ymd = year, month and day
mdy = month, day and year
dmy = day, month and year
Parameters TimeCharSep - - - - - - - - - : Time separator (ASCII character)
Parameters TimeWithSec 0 1 - - - 1
Showing the seconds in the real time
1 = yes
Parameters Time AM/PM 0 1 - - - 0
Time format
0 = 24 h (for example 15:20)
1 = 12 h (for example 3:20 PM)
Parameters Back Mode - - - - - - - - - TIME
Backlight mode
OFF = backlight is never lit
ON = backlight is always lit
TIME = backlight is lit the time one has
set with parameter BackTimeout
since the last operation with the
buttons
Parameters BackTimeout 0 240 s 60
Backlight duration (only if parameter Back Mode
has value TIME)
Parameters I/O Timeout 0 240 s 60
Local (or of the interface) CAN communication
time-out (after this time without CAN
communication, the display will show
Checking . . . and the l’I/O of the interface will
be disabled)
Parameters PW Timeout 0 240 s 60
CAN Network submenu access password
time-out (after this time without one has operated
with the buttons, to gain access again to the
submenu one has to set the password again)
Parameters Contrast 0 63 - - - 25 Display’s contrast
Parameters Buzz On Key 0 1 - - - 1
Uttering a beep while pressing a button
1 = yes
Parameters PrintLoad. 0 1 - - - 0
Showing the indication Loading . . . while
loading a page
1 = yes
Parameters Print Frame 0 1 - - - 0
Showing frames instead small size pages
1 = yes
Kommentare zu diesen Handbüchern