Evco c-pro micro SAVE Bedienungsanleitung PDF herunterladen (Seite 14)

C-PRO MICRO SAVE APPLICATION MANUAL

Page 14

Connector 3: Connector for the analogue output (optional, not available in the day versions)

Conn. Code Description (Version V+I)

C3-1 AO2 0-10VDC

C3-2 GND Common analogue output

C3-3 AO3 4-20mA

Description (Version I+I)

C3-1 AO2 4-20mA

C3-2 GND Common analogue output

C3-3 AO3 4-20mA

Description (Version V+V)

C3-1 AO2 0-10VDC

C3-2 GND Common analogue output

C3-3 AO3 0-10Vdc

Connector 4: Connector for low voltage signals

Conn. Code Description

C4-1 12VAC Power supply (12VAC/DC)

C4-2 5V Ratiometric transducers power supply

C4-3 GND Common analogue and digital inputs

C4-4 GND Common analogue and digital inputs

C4-5 AI4 Analogue input n.4

(for NTC probes, 0/4-20 mA or 0-5V transducers)

C4-6 AI3 Analogue input n.3

(for NTC probes, 0/4-20 mA or 0-5V transducers)

C4-7 AI2 Analogue input n.2 (for NTC probes)

C4-8 AI1 Analogue input n.1 (for NTC probes)

C4-9 12VAC Power supply (12VAC/DC)

(max. 50 mA, not protected against short circuit)

C4-10 12VDC 0/4-20 mA transducers and phase cut module power supply

C4-11 AO1 Jog output for phase cut module

C4-12 DI5 Digital input n.5

C4-13 DI4 Digital input n.4

C4-14 DI3 Digital input n.3

C4-15 DI2 Digital input n.2

C4-16 DI1 Digital input n.1

Connector 5: Connector for the remote keyboard and expansion of I/O (CAN)

Conn. Code Description

C5-1 CAN + Connector for the connection of the CAN + serial port

C5-2 GND Ground reference connector

C5-3 CAN - Connector for the connection of the CAN - serial port

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 53 54

Keine Kommentare

Evco c-pro micro SAVE Bedienungsanleitung Seite 14